Deposit and Scale Control

Deposit accumulations in cooling water systems reduce the efficiency of heat transfer and the carrying capacity of the water distribution system. In addition, the deposits cause oxygen differential cells to form. These cells accelerate corrosion and lead to process equipment failure. Deposits range from thin tightly adherent films, to thick gelatinous masses, depending on the depositing species and the mechanism responsible for deposition. Deposit formation is influenced strongly by system parameters, such as water and skin temperature, water velocity, residence time, and system metallurgy. The most severe deposition is encountered in process equipment operating with high surface temperatures and/or low water velocities. With the introduction of high-efficiency film fill, deposit accumulation in the cooling tower becomes an area of concern. Deposits are broadly categorized as scale or (microbiological) foulants.

Scale deposits are formed by precipitation and crystal growth on a surface which is in contact with water. Precipitation occurs when solubilities are exceeded either in the bulk water or the surface. The most common scale-forming salts that deposit on heat transfer surfaces are those that exhibit retrograde solubility with temperature. Although they may be completely soluble in the lower temperature bulk water, these compounds (e.g., calcium carbonate, calcium phosphate, and magnesium silicate) supersaturate in the higher-temperature water adjacent to the heat transfer surface and precipitate on the surface. Scaling is not always related to temperature. Calcium carbonate and calcium sulfate scaling occur on unheated surfaces when their solubilities are exceeded in the bulk water. Metallic surfaces are ideal sites for crystal nucleation because of their rough surfaces and the low velocities adjacent to the surface. Corrosion cells on the metal surface produce areas of high pH, which promote the precipitation of many cooling water salts. Once formed, scale deposits initiate additional nucleation, and crystal growth proceeds at an accelerated rate.

ANCI offers scale and deposit control agents for all types of deposit including organic phosphonates and different types of high stress polymeric dispersants.